Tinmar Inc v. CNC Systems Inc et al
Tinmar Inc |
Geoff Neely, CNC Systems Inc and Phillips Corporation |
The Boeing Company and CamCad Technologies, Inc. |
5:2018cv00505 |
March 29, 2018 |
US District Court for the Northern District of Alabama |
Northeastern Office |
Madison |
Madeline Hughes Haikala |
Contract: Other |
28 U.S.C. § 1441 |
Both |
Docket Report
This docket was last retrieved on November 12, 2021. A more recent docket listing may be available from PACER.
Document Text |
---|
Filing 123 RESPONSE in Opposition re #102 MOTION for Summary Judgment filed by Tinmar Inc. (Revera, Gregory) |
Filing 122 RESPONSE in Opposition re #105 MOTION for Summary Judgment filed by Tinmar Inc. (Revera, Gregory) |
Filing 121 ***Document Sealed - EXHIBITS in support of Plaintiff's forthcoming briefs in opposition to the Summary Judgment Motion of CAMCAD Technologies, Inc. (Doc. #105 ), CNC System's Motion for Summary Judgment (Doc. #102 ) and CNC System's Brief in Support of Summary Judgment (Doc. #107 ). (Attachments: #1 Exhibit I, #2 Exhibit J, #3 Exhibit K) (KEK) |
Filing 120 Evidentiary Material of TinMar in Opposition to Summary Judgment Motions PART II. (Attachments: #1 Exhibit PX1, #2 Exhibit PX2, #3 Exhibit PX3, #4 Exhibit PX4, #5 Exhibit PX5, #6 Exhibit PX6, #7 Exhibit PX7, #8 Exhibit PX8, #9 Exhibit PX9, #10 Exhibit PX10, #11 Exhibit PX11, #12 Exhibit PX12, #13 Exhibit PX13, #14 Exhibit PX14, #15 Exhibit PX15, #16 Exhibit PX16, #17 Exhibit PX17, #18 Exhibit PX18, #19 Exhibit PX19, #20 Exhibit PX20, #21 Exhibit PX21, #22 Exhibit PX22, #23 Exhibit PX23, #24 Exhibit PX24, #25 Exhibit PX25, #26 Exhibit PX26, #27 Exhibit PX27, #28 Exhibit PX28, #29 Exhibit PX29, #30 Exhibit PX30, #31 Exhibit PX31, #32 Exhibit PX32, #33 Exhibit PX33, #34 Exhibit PX34, #35 Exhibit PX35, #36 Exhibit PX36, #37 Exhibit PX37, #38 Exhibit PX38, #39 Exhibit PX39, #40 Exhibit PX40, #41 Exhibit PX41, #42 Exhibit PX42, #43 Exhibit PX43, #44 Exhibit PX44, #45 Exhibit PX45, #46 Exhibit PX46, #47 Exhibit PX47, #48 Exhibit PX48, #49 Exhibit PX49, #50 Exhibit PX50, #51 Exhibit PX51, #52 Exhibit PX52, #53 Exhibit PX53, #54 Exhibit PX54, #55 Exhibit PX55, #56 Exhibit PX56, #57 Exhibit PX57, #58 Exhibit PX58, #59 Exhibit PX59, #60 Exhibit PX60, #61 Exhibit PX61, #62 Exhibit PX62, #63 Exhibit PX63, #64 Exhibit PX64, #65 Exhibit PX65, #66 Exhibit PX66, #67 Exhibit PX67, #68 Exhibit PX68, #69 Exhibit PX69, #70 Exhibit PX70, #71 Exhibit PX71, #72 Exhibit PX72, #73 Exhibit PX73, #74 Exhibit PX74, #75 Exhibit PX75, #76 Exhibit PX76, #77 Exhibit PX77, #78 Exhibit PX78, #79 Exhibit PX79, #80 Exhibit PX80, #81 Exhibit PX81, #82 Exhibit PX82, #83 Exhibit PX83, #84 Exhibit PX84, #85 Exhibit PX85, #86 Exhibit PX86, #87 Exhibit PX87, #88 Exhibit PX88, #89 Exhibit PX89, #90 Exhibit PX90, #91 Exhibit PX91, #92 Exhibit PX92, #93 Exhibit PX93, #94 Exhibit PX94, #95 Exhibit PX95, #96 Exhibit PX96, #97 Exhibit PX97, #98 Exhibit PX98, #99 Exhibit PX99, #100 Exhibit PX100, #101 Exhibit PX101, #102 Exhibit PX102, #103 Exhibit PX103, #104 Exhibit PX104, #105 Exhibit PX105, #106 Exhibit PX106, #107 Exhibit PX107, #108 Exhibit PX108, #109 Exhibit PX109, #110 Exhibit PX110, #111 Exhibit PX111, #112 Exhibit PX112, #113 Exhibit PX113, #114 Exhibit PX114, #115 Exhibit PX115, #116 Exhibit PX116, #117 Exhibit DX11, #118 Exhibit DX12, #119 Exhibit DX13, #120 Exhibit DX14, #121 Exhibit DX15, #122 Exhibit DX16, #123 Exhibit DX17, #124 Exhibit DX18, #125 Exhibit DX19, #126 Exhibit DX20, #127 Exhibit DX21, #128 Exhibit DX22, #129 Exhibit DX23, #130 Exhibit DX24, #131 Exhibit DX25, #132 Exhibit DX26, #133 Exhibit DX27, #134 Exhibit DX28, #135 Exhibit DX29, #136 Exhibit DX30, #137 Exhibit DX31, #138 Exhibit DX45, #139 Exhibit DX46, #140 Exhibit DX47)(Revera, Gregory) |
Filing 119 Evidentiary Material of TinMar in Opposition to Summary Judgment Motions PART I. (Attachments: #1 Exhibit A. Deposition of Dave Valentine, #2 Exhibit B. Deposition of Don McKillop and CAMCAD, #3 Exhibit C. Deposition of Scott Oden, #4 Exhibit D. Deposition of Geoff Neely, #5 Exhibit E. Deposition of Johnathan Pylant, #6 Exhibit F. Deposition of Steve Acari, #7 Exhibit G. Declaration of Mark Everett, #8 Exhibit H. Report of Rufus Brown)(Revera, Gregory) |
Filing 118 TEXT ORDER: The Court grants Tinmar's unopposed motion to file under seal certain evidence in support of its forthcoming brief in response to the motion for summary judgment. (Doc. #117 ). If the Court determines that some or all of the information contained in the evidence should not remain under seal, the Court will give the parties notice and an opportunity to be heard. Signed by Judge Madeline Hughes Haikala on 11/9/2021. (YMB) |
Filing 117 Unopposed MOTION to Seal Exhibits in Opposition to Motion for Summary Judgment by Tinmar Inc. (Revera, Gregory) |
Filing 116 TEXT ORDER: The Court grants TinMar's motion for an extension of time to respond to the summary judgment motions of CNC and CamCad. (Doc. #112 ). TinMar shall have until November 12, 2021 to file responding briefs to CNC and CamCad's motions for summary judgment. CNC shall have until December 3, 2021 to file its reply brief. CamCad shall have until December 8, 2021 to file its reply brief. The Court grants TinMar's unopposed motion for leave to file excess pages in response to CNC's summary judgment motion. (Doc. #113 ). Signed by Judge Madeline Hughes Haikala on 10/25/2021. (KEK) |
Filing 115 ORDER denying without prejudice #100 Motion for Protective Order. For the reasons stated during the October 22, 2021 telephone conference in this matter, the Court denies the pending motion for protective order without prejudice, pending resolution of the defendants' summary judgment motions. Signed by Judge Madeline Hughes Haikala on October 22, 2021. (Haikala, Madeline) |
Minute Entry for proceedings held before Judge Madeline Hughes Haikala: Telephonic Motion Hearing held on 10/22/2021 re #100 Motion for Protective Order; #112 Motion for Extension of Time to Respond to Summary Judgment Motions; and #113 Unopposed Motion for Leave to File Excess pages in Response to CNC System's Summary Judgment Motion. (Court Reporter Leah Turner.) (YMB) |
Filing 114 TEXT ORDER: Before the Court is the motion for a protective order, (Doc. #100 ), the motion for an extension of time, (Doc. #112 ), and the motion for leave to file excess pages, (Doc. #113 ). The Court sets these matters for a telephone conference at 2 p.m. CST on October 22, 2021. Counsel of record shall please dial (877) 873-8018 and enter access code 5313999 to participate in the call. Signed by Judge Madeline Hughes Haikala on 10/21/2021. (KEK) |
Filing 113 Unopposed MOTION for Leave to File excess pages in Response to CNC System's Summary Judgment Motion by Tinmar Inc. (Revera, Gregory) |
Filing 112 MOTION for Extension of Time to File Response/Reply as to 104 Order on Motion for Summary Judgment, #102 MOTION for Summary Judgment , 109 Order on Motion for Summary Judgment, #105 MOTION for Summary Judgment by Tinmar Inc. (Revera, Gregory) |
Filing 111 REPLY to re #108 CAMCAD's Objection to Protective Order filed by Tinmar Inc. (Attachments: #1 Exhibit A Subpoena to Boeing)(Revera, Gregory) |
Filing 110 RESPONSE to (Boeing's Response to CamCad's Opposition to Motion for Protective Order) filed by The Boeing Company. (Attachments: #1 Exhibit)(English, W) |
Filing 109 TEXT ORDER: Camcad Technologies, Inc. has filed a motion for summary judgment. (Doc. #105 ). Responses are due by 11/1/2021; replies are due by 11/15/2021. Signed by Judge Madeline Hughes Haikala on 10/13/2021. (YMB) |
Filing 108 RESPONSE in Opposition re #100 MOTION for Protective Order filed by CamCad Technologies, Inc.. (Harris, James) |
Filing 107 Brief re #102 MOTION for Summary Judgment filed by CNC Systems Inc. (Holt, David) |
Filing 106 ***Document Sealed - Exhibits in Support of #102 Motion for Summary Judgment filed by CNC Systems Inc. (Attachments: #1 Exhibit 1, #2 Exhibit 2, #3 Exhibit 3, #4 Exhibit 4, #5 Exhibit 5, #6 Exhibit 6, #7 Exhibit 7, #8 Exhibit 8, #9 Exhibit 9, #10 Exhibit 10, #11 Exhibit 11, #12 Exhibit 12, #13 Exhibit 13) (KEK) |
Filing 105 MOTION for Summary Judgment by CamCad Technologies, Inc.. (Attachments: #1 Exhibit Exhibit A)(Harris, James) |
Filing 104 TEXT ORDER: CNC Systems, Inc. has filed a Motion for Summary Judgment. (Doc. #102 ). Responses are due by 10/29/2021; replies are due by 11/12/2021. Signed by Judge Madeline Hughes Haikala on 10/6/2021. (YMB) |
Filing 103 Evidentiary Material re: #102 MOTION for Summary Judgment . (Attachments: #1 Exhibit 1 - Deposition of Mark Everett, #2 Exhibit 2 - Declaration of David Valentine, #3 Exhibit 3 - 30b6 Deposition of Mark Everett, #4 Exhibit 4 - Declaration of Don McKillop, #5 Exhibit 5 - Deposition of Jeanne Pridgen, #6 Exhibit 6 - Deposition of Billy Kidder, #7 Exhibit 7 - TinMar000495, #8 Exhibit 8 - TinMar011637, #9 Exhibit 9 - TinMar011326, #10 Exhibit 10 - Tinmar's Discovery Responses, #11 Exhibit 11 - Expert Report of Michael Caliguri)(Holt, David) |
Filing 102 MOTION for Summary Judgment by CNC Systems Inc. (Holt, David) |
Filing 101 TEXT ORDER: Plaintiff TinMar, Inc. and The Boeing Company have filed a Motion for Entry of Protective Order. (Doc. #100 ). The parties indicate that CamCad Technologies opposes the Motion. On or before 10/13/2021, CAMCAD shall please file its opposition to the Motion. TinMar and Boeing may file any reply on or before 10/18/2021. Signed by Judge Madeline Hughes Haikala on 10/1/2021. (YMB) |
Filing 100 MOTION for Protective Order by The Boeing Company, Tinmar Inc. (Attachments: #1 Text of Proposed Order)(Revera, Gregory) |
Filing 99 TEXT ORDER: The Court grants CNC's unopposed motion to exceed page limitation. (Doc. #97 ). CNC's brief in support of its motion for summary judgment shall not exceed 50 pages. Signed by Judge Madeline Hughes Haikala on 9/29/2021. (YMB) |
Filing 98 TEXT ORDER: The Court grants CNC's motion to file certain exhibits to its motion for summary judgment under seal. (Doc. #96 ). If the Court determines that some or all of the information contained in the document should not remain under seal, the Court will give the parties notice and an opportunity to be heard. Signed by Judge Madeline Hughes Haikala on 9/29/2021. (YMB) |
Filing 97 Unopposed MOTION for Leave to File Excess Pages in Support of Motion for Summary Judgment by CNC Systems Inc. (Holt, David) |
Filing 96 Unopposed MOTION to Seal Exhibits in Support of Motion for Summary Judgment by CNC Systems Inc. (Holt, David) |
Filing 95 NOTICE of Change of Address by James A Harris, Jr (Harris, James) |
Filing 94 TEXT ORDER: The Court grants the parties' joint motion for extension of time. (Doc. #93 ). Reset deadline: Dispositive motions are due on or before October 7, 2021. Signed by Judge Madeline Hughes Haikala on 8/26/2021. (YMB) |
Filing 93 Joint MOTION to Continue Dispositive Motion Deadline by CNC Systems Inc. (Schaefer, Angela) |
Filing 92 TEXT ORDER: Consistent with the discussion held during the telephonic status conference on 6/29/2021, the Court extends the dispositive motions deadline to 9/2/2021. Signed by Judge Madeline Hughes Haikala on 6/29/2021. (YMB) |
Minute Entry for proceedings held before Judge Madeline Hughes Haikala: Telephonic Status Conference held on 6/29/2021. Order extending dispositive motions deadline to follow. (Court Reporter Leah Turner.) (YMB) |
Filing 91 TEXT ORDER: The in-person Status Conference currently set 6/28/2021 is converted into a Telephonic Status Conference on Tuesday, 6/29/2021 at 10:00 AM. Counsel shall please dial 877-848-7030 and enter access code 4974062 to participate in the conference. Signed by Judge Madeline Hughes Haikala on 6/22/2021. (YMB) |
Filing 90 STATUS REPORT Concerning Mediation by CNC Systems Inc, CamCad Technologies, Inc., Tinmar Inc. filed by CNC Systems Inc, CamCad Technologies, Inc., Tinmar Inc (Revera, Gregory) |
Filing 89 TEXT ORDER: The parties have notified the Court that mediation of this action is scheduled to occur on Tuesday, May 4, 2021. On or before Friday, May 7, 2021, the parties shall please file a joint report updating the Court on the status of the mediation. Signed by Judge Madeline Hughes Haikala on 4/2/2021. (YMB) |
Filing 88 STATUS REPORT Joint Status Report Concerning Settlement Efforts by CNC Systems Inc. filed by CNC Systems Inc (Holt, David) |
Filing 87 FOURTH AMENDED SCHEDULING ORDER: The Court grants the parties' joint motion for extension of time. (Doc. #86 ). Discovery due by 7/5/2021. Dispositive motions due by 8/2/2021. Status Conference reset for Monday, 6/28/2021 at 11:30 AM, Federal Courthouse, Huntsville, AL. Signed by Judge Madeline Hughes Haikala on 3/2/2021. (YMB) |
Filing 86 Joint MOTION to Continue Case Deadlines by CNC Systems Inc. (Holt, David) |
Filing 85 TEXT ORDER: Before the Court is CAMCAD's request to extend non-party Boeing's deposition time, scheduled for February 19, 2021, from seven hours to nine hours, and allot three hours each of questioning to CAMCAD, CNC, and Tinmar. (Doc. #81 ). The Court has also reviewed the submissions from CNC, (Doc. #82 ), Tinmar, (Doc. #83 ), and Boeing. (Doc. #84 ). The Court grants CAMCAD's motion. The Boeing deposition is extended to nine hours, and CAMCAD, CNC, and Tinmar will each be allowed three hours to question Boeing's representative. Signed by Judge Madeline Hughes Haikala on 2/12/2021. (KEK) |
Filing 84 RESPONSE to Motion re #81 MOTION for Protective Order filed by The Boeing Company. (English, W) |
Filing 83 RESPONSE in Opposition re #81 MOTION for Protective Order filed by Tinmar Inc. (Revera, Gregory) |
Filing 82 RESPONSE to Motion re #81 MOTION for Protective Order filed by CNC Systems Inc. (Schaefer, Angela) |
Filing 81 MOTION for Protective Order by CamCad Technologies, Inc.. (Harris, James) |
Filing 80 ORDER. Consistent with the discussion on the record during the December 21, 2020 telephone conference in this matter, the parties must conduct discovery relating to damages and mediate this case within 90 days. Within 90 days, the parties must file a joint status report concerning their settlement efforts. Signed by Judge Madeline Hughes Haikala on December 21, 2020. (Haikala, Madeline) |
Filing 79 ORDER denying #73 Motion to Quash. For the reasons discussed on the record during the December 21, 2020 telephone conference in this matter, the Court denies Camcad's motion to quash the non-party subpoena to Vero Software. Signed by Judge Madeline Hughes Haikala on December 21, 2020. (Haikala, Madeline) |
Filing 78 ORDER finding as moot #74 Motion for Leave to File in light of the order in Doc. 77. Signed by Judge Madeline Hughes Haikala on December 21, 2020. (Haikala, Madeline) |
Filing 77 ORDER denying #71 Motion to Dismiss. For the reasons discussed on the record during the December 21, 2020 telephone conference in this matter, the Court finds that neither APEC nor Heidehain is a an indispensable party to this litigation. Therefore, the Court denies Camcad's motion to dismiss. Signed by Judge Madeline Hughes Haikala on December 21, 2020. (Haikala, Madeline) |
Minute Entry for proceedings held before Judge Madeline Hughes Haikala: Telephone Conference held on 12/21/2020 re #70 Motion for Discovery Teleconference and #71 Motion to Dismiss. Order to follow. (Court Reporter Leah Turner.) (YMB) |
Filing 76 RESPONSE in Opposition re #73 MOTION to Quash Subpoena to Vero Software Inc. filed by CNC Systems Inc. (Attachments: #1 Exhibit Transcript of Deposition of Don McKillop)(Holt, David) |
Filing 75 Transcript of Proceedings held on 10/8/2020, before Judge Madeline Hughes Haikala. Court Reporter/Transcriber Leah Turner. Transcript may be viewed at the court public terminal or purchased through the Court Reporter/Transcriber before the deadline for Release of Transcript Restriction. After that date it may be obtained through PACER. NOTICE: The parties have seven (7) calendar days to file with the Court a Notice of Intent to Request Redaction of this transcript. If no such Notice is filed, the transcript will be made remotely electronically available to the public without redaction after 90 calendar days. (A copy can be obtained at http://www.alnd.uscourts.gov/local/court%20forms/transcripts/Transcript% 20Redaction%20Policy.pdf) See Transcript Redaction Policy Redaction Request due 12/25/2020. Redacted Transcript Deadline set for 1/4/2021. Release of Transcript Restriction set for 3/4/2021. (KEK) |
Filing 74 MOTION for Leave to File Amended Complaint by CamCad Technologies, Inc.. (Attachments: #1 Exhibit A)(Harris, James) |
Filing 73 MOTION to Quash Subpoena to Vero Software Inc. by CamCad Technologies, Inc.. (Harris, James) |
Filing 72 TEXT ORDER: Before the Court is the parties' joint motion for a telephone conference to address a discovery dispute, (Doc. #70 ), and CamCad's 12(b)(7) motion to dismiss for failure to join a party under Federal Rule of Civil Procedure 19. (Doc. #71 ). The Court sets these matters for a telephone conference on Monday December 21, 2020 at 11:30 a.m. CST. Counsel of record shall please dial (877) 873-8018 and enter access code 5313999 to participate in the conference. Signed by Judge Madeline Hughes Haikala on 11/9/2020. (KEK) |
Filing 71 MOTION to Dismiss by CamCad Technologies, Inc.. (Harris, James) |
Filing 70 Joint MOTION for Discovery Requesting Telephone Conference to Discuss Discovery Dispute by CamCad Technologies, Inc.. (Attachments: #1 Exhibit Exhibit A to Joint Motion)(Harris, James) |
Minute Entry for proceedings held before Judge Madeline Hughes Haikala: Telephone Conference held on 10/8/2020. (Court Reporter Leah Turner.) (YMB) |
Filing 69 TEXT ORDER: The parties have filed a joint motion requesting a telephone conference regarding a discovery dispute. (Doc. #68 ). The Court grants the motion and sets this matter for a telephone conference at 11:00 a.m. on October 8, 2020. Counsel of record please dial 877-873-8018 and enter access code 5313999 to participate in the conference. Signed by Judge Madeline Hughes Haikala on 9/24/2020. (KEK) |
Filing 68 Joint MOTION for Discovery Requesting Telephone Conference to Discuss Discovery Dispute by CamCad Technologies, Inc.. (Attachments: #1 Exhibit Exhibit A to Joint Motion Requesting a Telephone Conference to Discuss Discovery Dispute, #2 Exhibit Exhibit B to Joint Motion Requesting a Telephone Conference to Discuss Discovery Dispute)(Harris, James) |
Filing 67 ANSWER to #61 Amended Complaint OF TINMAR INC. by CamCad Technologies, Inc..(Harris, James) |
Filing 66 ORDER: The Court grants the parties' Joint Motion for Pro Tanto Dismissal. (Doc. #65 ). The Court ORDERS that plaintiff's claims against Defendants Phillips Corporation and Geoff Neely are dismissed with prejudice. These parties shall bear their own expenses, costs of litigation, and attorney's fees with regard to these claims. Signed by Judge Madeline Hughes Haikala on 8/6/2020. (YMB) |
Filing 65 Joint MOTION to Dismiss , Pro Tanto, claims against Phillips and Neely by Tinmar Inc. (Revera, Gregory) |
Filing 64 THIRD AMENDED SCHEDULING ORDER. The Court grants the parties' joint motion for extension of time. (Doc. #63 ). Discovery due by 5/3/2021. Dispositive motions due by 6/1/2021. Status Conference reset for Monday, 5/24/2021 at 11:30 AM, Federal Courthouse, Huntsville, AL. Signed by Judge Madeline Hughes Haikala on 7/30/2020. (YMB) |
Filing 63 Joint MOTION to Continue Case Deadlines by CNC Systems Inc. (Holt, David) |
Filing 62 ANSWER to Counterclaim by CNC Systems Inc.(Holt, David) |
Filing 61 AMENDED COMPLAINT against CamCad Technologies, Inc., filed by Tinmar Inc. (Attachments: #1 Exhibit purchase order)(Revera, Gregory) |
Filing 60 COUNTERCLAIM against CNC Systems Inc, filed by CamCad Technologies, Inc.. (Attachments: #1 Exhibit Exhibits 1-3 to Counterclaim)(Harris, James) |
Filing 59 TEXT ORDER: The Court grants CAMCAD's motion for leave to file a counterclaim against CNC Systems, Inc. (Doc. #49 ). The Court also grants Tinmar Inc.'s motion for leave to file a claim against CAMCAD (Doc. #50 ). Signed by Judge Madeline Hughes Haikala on 7/22/2020. (KEK) |
Filing 58 STANDING ORDER FOR CIVIL CASES PENDING BEFORE JUDGE HAIKALA. Signed by Judge Madeline Hughes Haikala on 5/4/2020. (KEK) |
Filing 57 TEXT ORDER: The Court grants the motion to withdraw Attorney Henry A. Andrews as counsel of record in this action. (Doc. #56 ). Signed by Judge Madeline Hughes Haikala on 4/30/2020. (YMB) |
Filing 56 MOTION to Withdraw as Attorney of Henry A. Andrews by Geoff Neely, Phillips Corporation. (Stewart, Robert) |
Filing 55 SECOND AMENDED SCHEDULING ORDER: The Court grants the parties' joint motion for extension of time. (Doc. #54 ). Discovery due by 11/2/2020. Disposiive motions due by 12/3/2020. Status Conference reset for Monday, 10/26/2020 at 11:30 AM, Federal Courthouse, Huntsville, AL. Signed by Judge Madeline Hughes Haikala on 4/29/2020. (YMB) |
Filing 54 Joint MOTION for Extension of Time (Motion to Extend Deadlines) by CNC Systems Inc. (Holt, David) |
Filing 53 STANDING ORDER FOR CIVIL CASES PENDING BEFORE JUDGE HAIKALA. Signed by Judge Madeline Hughes Haikala on 03/25/2020. (AKD) |
Filing 52 TEXT ORDER: The Court grants Attorney Robert B. Stewart's motion to admit Emmit F. Kellar pro hac vice in this action. (Doc. #51 ). Signed by Judge Madeline Hughes Haikala on 3/6/2020. (YMB) |
Filing 51 MOTION for Leave to Appear Pro Hac Vice Emmit F. Kellar by Geoff Neely, Phillips Corporation. (Stewart, Robert) |
PHV Fee paid: $ 75, receipt number 1126-3551987 (ALND B4601104652). (Stewart, Robert) Modified on 3/10/2020 (KEK). |
Filing 50 MOTION for Leave to File claim against CAMCAD by Tinmar Inc. (Attachments: #1 Exhibit Claim against CAMCAD)(Revera, Gregory) |
Filing 49 MOTION for Leave to File Counterclaim Against Third-Party Plaintiff CNC Systems, Inc. by CamCad Technologies, Inc.. (Attachments: #1 Exhibit Exhibit A, #2 Exhibit Exhibits 1-3)(Harris, James) |
Filing 48 TEXT ORDER: The Court grants Attorney Charles A. Ray, IV's motion to withdraw as counsel of record for Defendants Phillips Corporation and Geoff Neely. (Doc. #47 ). Signed by Judge Madeline Hughes Haikala on 2/11/2020. (YMB) |
Filing 47 MOTION to Withdraw as Attorney by Geoff Neely, Phillips Corporation. (Ray, Charles) |
Filing 46 NOTICE of Appearance by Robert B Stewart on behalf of Geoff Neely, Phillips Corporation (Stewart, Robert) |
Filing 45 NOTICE of Appearance by A Joe Peddy on behalf of Geoff Neely, Phillips Corporation (Peddy, A) |
Filing 44 NOTICE of Appearance by M Paul Killian on behalf of Tinmar Inc (Killian, M) |
Filing 43 NOTICE of Appearance by Angela Marie Schaefer on behalf of CNC Systems Inc (Schaefer, Angela) |
Filing 42 AMENDED SCHEDULING ORDER: The Court grants the parties' joint motion for extension of time. (Doc. #41 ). Discovery due by 7/1/2020. Dispositive motions due by 8/3/2020. Status Conference reset for Monday, 6/22/2020 at 11:30 AM, Federal Courthouse, Huntsville, AL. Signed by Judge Madeline Hughes Haikala on 12/29/2019. (YMB) |
Filing 41 Joint MOTION for Extension of Time to Complete Discovery by Tinmar Inc. (Revera, Gregory) |
Filing 40 PROTECTIVE ORDER. Signed by Judge Madeline Hughes Haikala on 9/20/2019. (YMB) |
Filing 39 Joint MOTION for Protective Order by CNC Systems Inc. (Attachments: #1 Text of Proposed Order Proposed Protective Order)(Holt, David) |
Filing 38 ANSWER to Third Party Complaint by CamCad Technologies, Inc..(Harris, James) |
Filing 37 NOTICE by CNC Systems Inc of Service of Discovery (Holt, David) |
Filing 36 TEXT ORDER: For the reasons discussed on the record during the July 1, 2019 telephone conference, the Court denies CamCad Technologies, Inc.'s motion to dismiss (Doc. #29 ) and motion for protective order (Doc. #33 ). Counsel agreed to continue the deposition set for July 9, 2019 and include CamCad in discovery scheduling moving forward. Signed by Judge Madeline Hughes Haikala on 7/2/2019. (KEK) |
Filing 35 ORDER finding as moot #25 Motion to Dismiss. CNC Systems has filed an amended third-party complaint. (Doc. #28 ). Because the amended complaint is the operative third-party pleading, the Court denies CamCad's motion to dismiss the original third-party complaint; that motion is moot. Signed by Judge Madeline Hughes Haikala on July 1, 2019. (Haikala, Madeline) |
Minute Entry for proceedings held before Judge Madeline Hughes Haikala: Motion Hearing held on 7/1/2019 re #29 MOTION to Dismiss or Motion to Strike filed by CamCad Technologies, Inc., #33 MOTION for Protective Order filed by CamCad Technologies, Inc. Written Order to be entered. (Court Reporter Teresa Roberson.) (JLC) |
Filing 34 TEXT ORDER: Defendants Phillips Corporation and Geoff Neely contacted the Court and requested a telephone conference about CamCad Technologies, Inc.'s pending motion for a protective order. (Doc. #33 ). The Court sets this matter for a telephone conference at 3:30 p.m. on July 1, 2019. Counsel shall please dial 877-848-7030 and enter access code 4974062 to participate in the call. Signed by Judge Madeline Hughes Haikala on 6/28/2019. (KEK) |
Filing 33 MOTION for Protective Order by CamCad Technologies, Inc.. (Harris, James) |
Filing 32 NOTICE by CamCad Technologies, Inc. ACKNOWLEDGMENT OF RECEIPT AND REVIEW OF INITIAL ORDER (Harris, James) |
Filing 31 REPLY to Response to Motion re #25 MOTION to Dismiss or Motion to Strike First Amended Third Party Complaint filed by CamCad Technologies, Inc.. (Harris, James) |
Filing 30 Opposition to re #29 CAMCAD Technologies, Inc's Motion to Dismiss First Amended 3rd Party Complaint filed by CNC Systems Inc. (Holt, David) |
Filing 29 MOTION to Dismiss or Motion to Strike by CamCad Technologies, Inc.. (Harris, James) |
Filing 28 Amended THIRD PARTY COMPLAINT against CamCad Technologies, Inc., filed by CNC Systems Inc.(Holt, David) |
Filing 27 REPLY to Response to Motion re #25 MOTION to Dismiss or Motion to Strike filed by CamCad Technologies, Inc.. (Harris, James) |
Filing 26 RESPONSE in Opposition re #25 MOTION to Dismiss or Motion to Strike filed by CNC Systems Inc. (Holt, David) |
Filing 25 MOTION to Dismiss or Motion to Strike by CamCad Technologies, Inc.. (Harris, James) |
Filing 24 TEXT ORDER: Attorney Robert C. Gammons has filed a Motion to Withdraw. (Doc. #23 ). The Court GRANTS the Motion. Plaintiff will continue to be represented by Dustin D. Key and Gregory H. Rivera. Signed by Judge Madeline Hughes Haikala on 2/26/2019. (YMB) |
Filing 23 MOTION to Withdraw as Attorney by Tinmar Inc. (Gammons, Robert) |
Filing 22 NOTICE of Appearance by Gregory H Revera on behalf of Tinmar Inc (Revera, Gregory) |
Filing 21 Summons Issued as to CamCad Technologies, Inc. Returned to Defendant for service. (KEK) |
Filing 20 ANSWER to Complaint with Jury Demand , THIRD PARTY COMPLAINT against CamCad Technologies, Inc. by CNC Systems Inc.(Holt, David) |
Filing 19 SCHEDULING ORDER: Discovery due by 3/2/2020. Dispositive motions due by 4/2/2020. Status Conference set for Monday, 2/24/2020 at 11:30 AM, Federal Courthouse, Huntsville, AL. See Order for other deadlines and directives. Signed by Judge Madeline Hughes Haikala on 2/5/2019. (YMB) |
Filing 18 REPORT of Rule 26(f) Planning Meeting. (Gammons, Robert) |
Filing 17 ORDER denying #8 Motion to Dismiss - Because CNC has not satisfied the first prong of Rule 12(b)(7) inquiry, the Court does not have to proceed to the second phase of the inquiry. The Court denies CNCs motion to dismiss. (Doc. 8). The Court reminds the parties of their obligation to please confer and file a Rule 26(f) report within 14 days. Signed by Judge Madeline Hughes Haikala on 1/17/2019. (KEK) |
Filing 16 STATUS REPORT by Tinmar Inc. filed by Tinmar Inc (Gammons, Robert) |
Filing 15 TEXT ORDER: Defendant CNC filed a motion to dismiss. (Doc. 8). Pursuant to section III.A of the initial order (Doc. 5, pp. 3-4), the Court asks the parties to please confer regarding the arguments that CNC raised in its motion to dismiss. On or before October 17, 2018 Tinmar, Inc. shall please file a notice stating whether it intends to file an amended complaint adding CamCad as a party to this action. The Court denies CNC's motion to dismiss as to counts II, III, and V without prejudice to CNC's ability to pursue those issues in a motion for summary judgment. Signed by Judge Madeline Hughes Haikala on 10/4/2018. (KEK) |
Filing 14 RESPONSE in Opposition re #8 MOTION to Dismiss by CNC System, Inc. filed by Tinmar Inc. (Gammons, Robert) |
Filing 13 TEXT ORDER: Attorney Charles Ray has moved to admit Henry A. Andrews and Francis R. Laws pro hac vice in this action. (Docs. #9 and #10 ). The Court GRANTS the Motions. Signed by Judge Madeline Hughes Haikala on 5/9/2018. (YMB) |
PHV Fee paid: $ 50, receipt number 1126-3084020 (ALND B4601088900). (Ray, Charles) Modified on 5/9/2018 (KEK). |
PHV Fee paid: $ 50, receipt number 1126-3084021 (ALND B460108899). (Ray, Charles) Modified on 5/9/2018 (KEK). |
Filing 12 TEXT ORDER: The Court GRANTS the parties' Joint Motion to Extend Deadline for Report of Parties' Planning Meeting. (Doc. #11 ). The parties shall please confer and file a Rule 26(f) report within 14 days of the Court's ruling on CNC's Motion to Dismiss. Signed by Judge Madeline Hughes Haikala on 5/4/2018. (YMB) |
Filing 11 MOTION for Extension of Time for Parties Planning Meeting and Report by CNC Systems Inc. (Holt, David) |
Filing 10 MOTION for Leave to Appear Pro Hac Vice by Geoff Neely, Phillips Corporation. (Attachments: #1 Exhibit Affidavit of Henry Andrews)(Ray, Charles) |
Filing 9 MOTION for Leave to Appear Pro Hac Vice by Geoff Neely, Phillips Corporation. (Attachments: #1 Exhibit Affidavit of Francis Laws)(Ray, Charles) |
Filing 8 MOTION to Dismiss by CNC Systems Inc. (Attachments: #1 Exhibit A-Florida Profit Corporation Annual Report)(Holt, David) |
Filing Fee: Filing fee $ 400, receipt_number 1126-3062644 (ALND B4601088067) related document #1 NOTICE OF REMOVAL by Geoff Neely, Phillips Corporation, CNC Systems Inc from Circuit Court of Madison County, Alabama, case number 47-cv-2018-900448, filed by Geoff Neely, Phillips Corporation, CNC Systems Inc. (Attachments: # 1 Exhibit 1, # 2 Exhibit 1-A, # 3 Exhibit 1-B, # 4 Exhibit 1-C, # 5 Exhibit 1-D, # 6 Exhibit 2)(KEK). (Ray, Charles) Modified on 4/9/2018 (KEK). |
Filing 7 ANSWER to Complaint by Geoff Neely, Phillips Corporation.(Ray, Charles) |
Filing 6 TEXT ORDER: The Court GRANTS Defendant CNC's Unopposed Motion for Extension of Time to Respond to Complaint. (Doc. #4 ). CNC shall respond to the Complaint on or before April 27, 2018. Signed by Judge Madeline Hughes Haikala on 4/5/2018. (YMB) |
Filing 5 INITIAL ORDER. Signed by Judge Madeline Hughes Haikala on 4/5/2018. (KEK) |
Filing 4 MOTION for Extension of Time to Respond to Complaint by CNC Systems Inc. (Loftin, G) |
Filing 3 NOTICE of Appearance by G Bartley Loftin, III on behalf of CNC Systems Inc (Loftin, G) |
Filing 2 NOTICE of Appearance by David W Holt on behalf of CNC Systems Inc (Holt, David) |
Filing 1 NOTICE OF REMOVAL by Geoff Neely, Phillips Corporation, CNC Systems Inc from Circuit Court of Madison County, Alabama, case number 47-cv-2018-900448, filed by Geoff Neely, Phillips Corporation, CNC Systems Inc. (Attachments: #1 Exhibit 1, #2 Exhibit 1-A, #3 Exhibit 1-B, #4 Exhibit 1-C, #5 Exhibit 1-D, #6 Exhibit 2)(KEK) |
Access additional case information on PACER
Use the links below to access additional information about this case on the US Court's PACER system. A subscription to PACER is required.
Access this case on the Alabama Northern District Court's Electronic Court Filings (ECF) System
- Search for Party Aliases
- Associated Cases
- Attorneys
- Case File Location
- Case Summary
- Docket Report
- History/Documents
- Parties
- Related Transactions
- Check Status
Disclaimer: Justia Dockets & Filings provides public litigation records from the federal appellate and district courts. These filings and docket sheets should not be considered findings of fact or liability, nor do they necessarily reflect the view of Justia.